SINGLE sided MDF hardboard blank is approximately 1/8" thick, glossy white on the front and brown on the back, perfect for sublimation.

✔️Single Sided MDF - approximately 1/8"thick
✔️Available in multiples of 5 sets
✔️Choose from multiple sizes
✔️Canva Templates available HERE

🚫 Does not include hardware

📏APPROXIMATE SIZES:

2.0”h x 2.00”w - Dangle

1.5”h x 1.50”w - Dangle

1.0”h x 1.00”w - Dangle

0.75”h x 0.75”w - Dangle or Post

0.50”h x 0.50”w - Dangle or Post

❓ Worried about getting the settings right? Add a Scrap Pack to test your settings before using your good blanks!

Sublimation Instructions:
* Remove plastic film
* If necessary, clean any remaining smoke residue with soft cloth and rubbing alcohol.
* Press at 380-400 degrees, medium pressure for 50-60 seconds.

Use the following as a suggestion, your settings may vary depending on your equipment.

⭐ Remove plastic film

⭐ Clean any remaining smoke residue with soft cloth and rubbing alcohol.

⭐ Press at 380-400 degrees, medium pressure for 50-60 seconds.